Home > Optical Transceiver Module >

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Product Categories

TAKFLY COMMUNICATIONS CO., LTD.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Name: 10g Sfp Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
Brand: Takfly
Price: 6 USD

China 10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei wholesale

Brand Name : Takfly

Model Number : TKSFPP8510GSR

Certification : CE,ROHS,FCC,REACH,ISO9001,ISO14001

Place of Origin : China

MOQ : 1 piece

Price : USD 6~ USD 10

Payment Terms : T/T, Western Union, MoneyGram, Paypal, L/C

Supply Ability : 30000pcs/month

Delivery Time : 3-5 working days

Packaging Details : blister box + spone + carton

Speed : 10Gbps

Transmission Distance : 300M

Fiber Mode : Multimode

Compatible Switch Brand : CISCO/HP/Huawei/H3C/Juniper/ZTE/........

Grade : Commercial Grade/Industrial Grade

Wavelength : 850nm

Contact Now

10Gbps 850nm 300M SFP+ Optical Transceiver Module compatible with CISCO / HP / H3C / Juniper / Huawei

Description

This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125μm or 62.5/125μm multimode optical fiber (Table 1).

Fiber Type	Minimum model bandwidth @850nm(MHz-km)	Operating range (meters)
62.5um MMF	160	2~26
62.5um MMF	200	2~33
50um MMF	400	2~66
	500	2~82
	2000	2~300

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.

TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Features

Optical interface compliant to IEEE 802.3ae
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70 °C
Low power consumption
Maximum link length of 300m on 2000MHz/km MMF
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
RoHS6 compliant (lead free)

Applications

10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.953Gbps
Other optical links

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Ref.
Maximum Supply Voltag	Vcc	-0.5		4.7	V
Storage Temperature	TS	-40		85	°C
Case Operating Temperature	Tcase	-5		70	°C

Dimension

Comply to SFF-8432 rev5.0, the improved Pluggable form factor specification.

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Product Tags:

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	TAKFLY COMMUNICATIONS CO., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

10Gbps SFP+ Optical Transceiver Module

10g sfp+ transceiver

850nm 300M Optical Transceiver Module

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei Images